Chinese translation for "lag compensation"
|
- 滞后补偿
Related Translations:
- Example Sentences:
| 1. | That is why a delay , called lag compensation time ( lct ) , is introduced between the real action and the display on the other side of the transmission pipeline
这也是为什么会有一个延迟，也被称为滞后补偿时间( lct ) ，被引入到实际动作和在网络传输管道的另一端显示之间。 | | 2. | Non - linear square - lag compensation anti - windup design method , which is easily realized in engineering practice , is brought forward to the windup problem caused by saturation in system . the emulation results prove the feasibility of these methods
针对伺服系统中饱和非线性特性引起的windup问题，引入了便于工程实现的非线性平方滞后校正的跟踪环校正方法，仿真结果表明上述方法都非常有效。 | | 3. | In order to decrease the over - adjusting in temperature and transaction time , a multi - model selector was provided to different scenarios of ascending temperature to make this system be simulated under simulink ' s circumstances . the result of simulation demonstrated that the effect of the system temperature control with model selector is superior to that of the system with pid controller or with pure lag compensation
为了进一步降低渗氮炉到温前的温度超调量及过渡时间，又提出用一个模式控制器来进行多种升温方式的选择并在simulink环境中对带有模式控制器的温控系统进行了仿真实现，仿真结果表明带模式控制器的渗氮炉温控系统的控温效果又要优于带纯滞后补偿的pid控制系统。 | | 4. | According to the demand of the technology of gas nitriding , the author firstly put forward total demand analysis and systematic model - making for gas - nitriding furnace ' s temperature control system with uml in order to definite the temperature control system ' s functional requirement and the interaction of each object in this system on the basis of this idea . it ' s thought that the key step for realizing the temperature control system is the analysis and the design of the pid controller . considering that the gas - nitriding furnace has significant temperature lag , the author initially pointed out the opinion of realizing the system of temperature control by pid controller with pure lag compensation and then designed the parameter of pid controller with pure lag compensation and ordinary pid controller by matlab6 . 5
这篇论文以作者本人在原工作单位的技术改造实践中(即渗氮炉的技术改造)所遗留下来的技术问题为背景，根据气体渗氮工艺的具体需要，首先提出了用uml对渗氮炉温控系统进行总体的需求分析和系统实物建模以明确温控系统的功能需求及各对象间的交互，在此基础上分析得出温控系统实现的关键所在即pid控制器的分析设计和实现，由气体渗氮炉存在较大的温度滞后这一特性，初步提出用带纯滞后补偿的pid控制器来实现温控系统的温度控制，随后借助于matlab6 . 5平台对带纯滞后补偿的pid控制器和常规的pid控制器进行参数的设计与整定，进而在matlab6 . 5的simulink仿真环境中对基于两种不同pid控制器的渗氮炉的两种温控系统的设计方案进行了仿真实现及仿真结果比较，结果表明，采用带纯滞后补偿的pid控制系统的鲁棒性较常规的pid控制系统好。 |
- Similar Words：
- "lag bolt" Chinese translation, "lag characteristic" Chinese translation, "lag characteristics" Chinese translation, "lag coefficient" Chinese translation, "lag compe ator" Chinese translation, "lag compensator" Chinese translation, "lag concentrate" Chinese translation, "lag concentrates of fossils" Chinese translation, "lag correlation" Chinese translation, "lag correlation coefficient" Chinese translation
|
|
|
